About Powersoft T602
The T Series is a very flexible and cost effective amplifier platform loudspeaker processor.
All models deliver the same high peak voltage allowing high SPL with single 8/16 ohm cabinets on all models. The high voltage is also good for sharing power between the channels for applications such as bi-amped loudspeakers or subwoofers with passive tops.
The amplifiers feature input via Dante, AES3 and analog. The Dante and AES3 solutions are optimized for daisy-chained distribution of 2-channel audio for distribution to many amplifiers without the need for external switches/repeaters/ splitters. A simple Dante system has a daisy chain with the mixing console at one end and a WiFi access point at the other end and the amplifiers in-between.
The T Series is a very flexible and cost effective amplifier platform loudspeaker processor. The range consists of 2 and 4 channel models supporting channel powers from 750 W to 3000W.
All models deliver the same high peak voltage allowing high SPL with single 8/16 ohm cabinets on all models. The high voltage is also good for sharing power between the channels for applications such as bi-amped loudspeakers or subwoofers with passive tops.
The amplifiers feature input via Dante, AES3 and analog. The Dante and AES3 solutions are optimized for daisy-chained distribution of 2-channel audio for distribution to many amplifiers without the need for external switches/repeaters/splitters. A simple Dante system has a daisy chain with the mixing console at one end and a WiFi access point at the other end and the amplifiers in-between.
The loudspeaker processing sets a new benchmark for cost-effective amplification for small and medium sized systems and stage monitors.
The T Series can be controlled and configured in different ways.
• Full control with a PC running Armonia. Here it can be in mixed groups with advanced EQ together with other Powersoft products.
• Control from the front panel display for things like preset recall (also per output), gain, delay, mute. This makes it very easy to use for small systems in a rental company. The display also shows the available headroom with easy to read numbers in dB as well as other status monitoring.
• Web app. Use any device with a browser (e.g. a tablet) and access the amplifier via an external WiFi access point to control EQ etc.
Powersoft T602 Features
- The loudspeaker processing sets a new benchmark for cost-effective amplification for small and medium sized systems and stage monitors. The T Series can be controlled and configured in different ways.
- Full control with a PC running Armonia. Here it can be in mixed groups with advanced EQ together with other Powersoft products.
- Control from the front panel display for things like preset recall (also per output), gain, delay, mute. This makes it very easy to use for small systems in a rental company. The display also shows the available headroom with easy to read numbers in dB as well as other status monitoring.
- Web app. Use any device with a browser (e.g. a tablet) and access the amplifier via an external WiFi access point to control EQ etc.
- Group controllable advanced EQ with raised cosine filters
- Large preset library
- Preset compatibility with X Series
- Very long FIR filters (42.6 ms)
- Control and monitoring through ArmoniaPlus
Powersoft T602 Specifications
- Number of channels
- 2
- Output power
- Single channel mode
2 Ohm: 3000 W
4 Ohm: 2500 W
8 Ohm: 1300 W
Bridge mode
4 Ohm: 6000 W
8 Ohm: 5000 W - Max output voltage / current
- 145 Vpeak / 100 Apeak
- Power supply
- Universal, regulated switch mode
- Nominal power requirement
- 100-240 V +/-10%, 50-60 Hz
- Operating voltage
- 90 V - 264 V
- Power consumption
- Idle
115V:
Power: 32 W
230V:
Power: 32 W
1/8 of max output power @ 4 Ohm
115V:
Power: 824 W, Current Draw: 7.6 A
230V:
Power: 839 W, Current Draw: 4.3 A
- Operating temperature range
- 32 Degree - 113 Degree F (0 Degree - 45 Degree C)
- Thermal dissipation
- 1/8 of max output power @ 4 Ohm
115V:
Thermal Loss: 678 BTU/h, 170.9 kcal/h
230V:
Thermal Loss: 731 BTU/h, 184.2 kcal/h
- Gain
- 32dB
- Input sensitivity
- 2.57 Vrms
- Max input level
- 24dBu
- Frequency response
- 20 Hz - 20 kHz ( +/-0.5 dB) @ 1 W, 8 Ohm
- S/N ratio
- > 110 dB (20 Hz - 20 kHz, A weighted)
- Crosstalk separation
- <-70 dB @ 1kHz
- THD+N
- < 0.1% (typical < 0.5%)
- IMD
- < 0.1% (typical < 0.5%)
- Input impedance
- 20 k Ohm balanced
- AD Converter
- 24 Bit Tandem @ 48 kHz 125 dB-A Dynamic Range - 0.005% THD+N
- DA Converter
- 24 Bit Tandem @ 48 kHz 117 dB-A Dynamic Range - 0.003% THD+N
- Memory/presets
- 256 MB (RAM) plus 512 MB flash for presets
- Input equalizer
- Raised-cosine, custom FIR, parametric IIR: peaking, hi/lo-shelving, all-pass, band-pass, band-stop, hi/lo-pass
- Crossover
- linear phase (FIR), Butterworth, Linkwitz-Riley, Bessel: 6 dB/oct to 48 dB/oct (IIR)
- Delay
- 2 s (input) + 100 ms (output) for time alignment
- Limiters
- TruePower, RMS voltage, RMS current, Peak limiter
- Damping control
- Active DampingControl and LiveImpedance measurement
- Indicators and Controllers
- 8x Push-button - Setting operating parameters
1x Display - Settings and monitoring
1x Power switch
- AC main
- 1 x IEC C20 connector - 20 A max (region-specific power cord provided)
- Audio signal input
- 2 x XLR - Signal input
- Loudspeakers
- 2 x speakON - Neutrik NL4MD
- Network/data
- 1x Rj45 socket - RS485 data connection (non-DSP version)
1x Rj45 socket - DANTE
- Dimensions (L x H x W)
- 19.1 x 1.8 x 16" (484 x 44.5 x 405mm)
- Weight
- 16.5 lb (7.5kg)
