4-Channel High-Performance Amplifier Platform with DSP and Dante
The T Series is a very flexible and cost effective amplifier platform loudspeaker processor.
All models deliver the same high peak voltage allowing high SPL with single 8/16 ohm cabinets on all models. The high voltage is also good for sharing power between the channels for applications such as bi-amped loudspeakers or subwoofers with passive tops.
The amplifiers feature input via Dante, AES3 and analog. The Dante and AES3 solutions are optimized for daisy-chained distribution of 2-channel audio for distribution to many amplifiers without the need for external switches/repeaters/ splitters. A simple Dante system has a daisy chain with the mixing console at one end and a WiFi access point at the other end and the amplifiers in-between.
The T Series is Powersoft's newest addition to its touring line of amplifier platforms, designed to deliver cost-effective, high-quality performance loudspeaker processing. Available in both 4-channel and 2-channel, both versions support channel powers from 750 W to 3,000 W.
In addition to analog, the T Series includes AES3 and Dante by Audinate inputs, which are optimized for daisy-chained distribution of 2-channel audio to multiple amplifiers with no need for external switches or splitters. The T Series also allows remote control and advanced signal processing abilities through Powersoft's ArmoníaPlus, plus onboard DSP.
General
- Number of channels: 4
- Output power: Single channel mode: Bridge mode
- 2 Ω: 4 Ω: 8 Ω: 4 Ω: 8 Ω
- 1500 W: 1500 W: 1250 W: 3000W: 3000W
- Max output voltage / current: 145 Vpeak: / 50 Apeak
- AC Main Power
- Power supply: Universal, regulated switch mode
- Nominal power requirement: 100-240 V ±10%, 50-60 Hz
- Operating voltage: 90 V - 264 V
- Power consuption**: 115 V: 230 V
- Idle: 32 W: 32 W
- 1/8 of max output power @ 4 Ω: 1054 W: 9.5 A: 1027 W: 5.2 A
- Thermal
- Operating temperature range: 0º - 45º C - 32º - 113º F
- Thermal dissipation**: 115 V: 230 V
- 1/8 of max output power @ 4 Ω: 1039 BTU/h: 261.8 kcal/h: 944 BTU/h: 237.9 kcal/h
- AUDIO
- Gain: 32dB
- Input sensitivity: 2.57 Vrms
- Max input level: 24 dBu
- Frequency response: 20 Hz - 20 kHz (±0.5 dB) @ 1 W, 8 Ω
- S/N ratio: > 110 dB (20 Hz - 20 kHz, A weighted)
- Crosstalk separation: < -70 dB @ 1kHz
- THD+N: < 0.1% (typical < 0.5%)
- IMD: < 0.1% (typical < 0.5%)
- Input impedance: 20 kΩ balanced
- DSP
- AD Converter: 24 Bit Tandem @ 48 kHz 125 dB-A Dynamic Range - 0.005% THD+N
- DA Converter: 224 Bit Tandem @ 48 kHz 125 dB-A Dynamic Range - 0.003% THD+N
- Memory/presets: 256 MB (RAM) plus 512 MB flash for presets: /
- Input equalizer: Raised-cosine, custom FIR, parametric IIR: peaking, hi/lo-shelving, all-pass, band-pass, band-stop, hi/lo-pass
- Crossover: linear phase (FIR), Butterworth, Linkwitz-Riley, Bessel: 6 dB/oct to 48 dB/oct (IIR)
- Delay: 2 s (input) + 100 ms (output) for time alignment
- Limiters: TruePower, RMS voltage, RMS current, Peak limiter
- Damping control: Active DampingControl and LiveImpedance measurement
- Front panel
- Indicators and Controllers: 8 x Push-button - Setting operating parameters
- 1 x Display - Settings and monitoring
- 1 x Power switch -
- Connectors
- AC main: 1 x IEC C20 connector - 20 A max (region-specific power cord provided)
- Audio signal input: 4 x XLR - Signal input
- Loudspeakers: 2 x speakON - Neutrik NL4MD
- Network/data: 1 x Rj45 socket - RS485 data connection (non-DSP version)
- 1 x Rj45 socket - DANTE
- Construction
- Dimensions (L x H x W): 484 mm x 44.5 mm x 405 mm (19.1 in x 1.8 in x 16.0 in)
- Weight: 7.5 kg (16.5 lb)
