Skip to Content

Radial Engineering Power-2 Surge Suppressor and Power Conditioner

Radial Engineering R800 5005 00 Overview


Guard your electronic equipment, charge your mobile device, and light up your rack with the Radial Engineering Power-2 rackmount surge suppressor and power conditioner. Awarded Best in Show at NAMM 2020, Power-2 offers a sliding multicolor LED tray and nine outlets—one always-on outlet in front and eight switched outlets on the rear—protected against harmful power surges by the USA-made Metal Oxide Varistor.

With steel construction and robust components, Power-2 is ready for the challenges of constant sessions and live gigs. Plus, it yields low system noise while keeping radio-frequency interference out. Occupying just 1 RU of rack space, Power-2 is an ideal addition to gear racks used by studio operators, musicians, engineers, and producers.

LED Illumination
A tray slides out to illuminate rack equipment below, with ultrabright LEDs in seven color options along with a built-in dimmer to adjust as needed.
Unswitched Front-Panel Outlet
The single front-panel outlet will supply power even when the device is switched off, allowing you to easily connect and charge devices without powering on the entire rack.
Switched Rear-Panel Outlets
Eight rear-panel outlets are activated via the backlit power switch. Four of the eight outlets offer ample spacing for wall warts.
USB Charging Port
Also on the front panel is a 5V/1A USB Type-A charging port for mobile devices such as smartphones and tablets.
Fault Protection Indicator
An LED illuminates when the Power-2's USA-made Metal Oxide Varistor (MOV) is actively working. The MOV is designed to provide continuous protection for your equipment against varying resistance and high-voltage spikes from the AC main power source.
Noise Filtering
Power-2 utilizes shunt-mode technology and is non ground contaminating for lower system noise. A high-rejection RF interference filter is used to keep high frequencies and AM radio signals out of the power line, preventing contamination of audio signals.
Built Tough
A heavy-duty power on/off switch, rugged outlet connectors, and steel construction ensure that the Power-2 performs night after night without fail.


Radial Engineering R800 5005 00 Specs

Form FactorRackmount (with Included Hardware)
TypeConditioner / Surge Suppressor
Rated Current15 A
Number of Circuits1
MeteringNone
Battery BackupNo
Integrated LampsYes, 1 x Pull-Out (Front Panel)
Connections
Outlets1 x NEMA 5-15R (Front Panel, Unswitched, 1 Block-Sized)
8 x NEMA 5-15R (Rear Panel, Switched, 4 Block-Sized)
AC Power Connector1 x Hardwired Input
USB Ports1 x USB Type-A
EthernetNone
CoaxialNone
RJ11None
RemoteNone
Lamp ConnectorsNone
Electrical
AC Input Power120 VAC, 50 / 60 Hz
Load CapacityNot Specified by Manufacturer
Sequencing DelayNone
USB Output5 V, 1 A
Protection & Conditioning
Protection Types & ModesOvervoltage, Metal-Oxide Varistor (MOV), EMI Filter
Circuit BreakerYes, at 15 A with Push-Button Reset
Undervoltage ProtectionNone
Clamping Voltage130 V at 15 A (Line to Neutral)
Maximum Spike Current20,000 A
Surge Energy Rating210 Joules
Transformer IsolatedNo
EMI/RFI Noise FiltrationCommon-Mode:
10 dB (100 kHz)
41 dB (1 MHz)
50 dB (10 MHz)
Traverse/Differential-Mode:
19 dB (100 kHz)
41 dB (1 MHz)
42 dB (10 MHz)
Environmental
CertificationsCSA, UL
*as per Manufacturer
Operating Temperature37 to 72°F / 5 to 40°C
Physical
Rackmount Size1 RU (with Included Hardware)
Cable Length9' / 2.7 m
Wire Gauge14 AWG
Material of ConstructionSteel
Cable ManagementNone
Dimensions19 x 6.38 x 1.47" / 48.3 x 16.21 x 3.73 cm
Packaging Info
Package Weight12.42 lb
Box Dimensions (LxWxH)22.7 x 14.2 x 4.6"
Price
272.05 272.05

Terms and Conditions
30-day money-back guarantee
Shipping: 2-3 Business Days